Roughing and semifinishing of refractory steel ,manganese steel,stainless steel ,etc.
适合于耐热钢、高锰钢、不锈钢等材料的半精加工和浅粗加工。
Roughing and semifinishing of refractory steel ,manganese steel,stainless steel ,etc.
适合于耐热钢、高锰钢、不锈钢等材料的半精加工和浅粗加工。
Socket clevies is forgeable iron,hot galvanizing.Spring catch bronze or stainless steel.
碗头挂板为可锻铸铁件，热镀锌。弹簧销为青铜件或不锈钢件。
Its comprehensive coverage focuses on passivation (repassivation and depassivation) techniques with austenitic stainless steels.
它的广泛报导集中在用与钢硬化的渗氮技术为。
Both the shell and the inside are made of rotproof and antirust stainless steel.
该瓶盖外壳和内胆都是不锈钢，防腐防锈。
Channel companies welding stainless steel processing various models, ranging from heterotypic edge angle.I-H-plasma processing.
公
加工各种型号不锈钢槽钢，不等边异型角钢，工字钢，H型等离子加工等。
The imitated stainless steel decorative listel is made of foamed PVC , and hot pressed filmed surface.
●仿不锈钢装饰腰线的基材是由PVC发泡
成，表面采用热烫印膜。
The method for the determination of nickel in stainless steel by rapid spectrophotometric with diacetyldioxime is set up.
建立测定不锈钢中镍的丁二酮肟快速光度法。
Stainless steel in the bathroom is already novel, but Neo-Metro's Cerine suite can now be customized with water-resistant leather insets.
不锈钢在浴室已算是比较
奇的了，
铁的纯蜡套房，现在可以定制的耐水皮革插图 。
It holds that main causes promoting crack on martensite stainless steel are gross martensite and crystal boundary carburet and secondary phase distributed along crystal boundary.
文章认为，粗大的马氏体组织、晶界碳化物以及沿晶界分布的“第二相”组织是促使马氏体不锈钢产生裂纹的主要原因。
An investigation was made on the effect of rewelding on mechanical properties of Ultra-low carbon austenitic stainless steel based on mechanical properties test and microstructure examination.
通过对反复1～5次的超低碳奥氏体不锈钢力学性能的试验及金相组织的分析,研究了反复对超低碳奥氏体不锈钢力学性能的影响。
Hydrogen embrittlement of 2205 duplex stainless steel has been evaluated using electrochemical permeation measurement, hydrogen microprint technique and slow strain rate tensile test in this study.
摘要本实验主要利用电化学氢渗透量测、氢原子微印技术及慢速率拉伸试验，针对2205双相不锈钢的氢脆性与氢原子扩散方式的关系进行探讨。
Hydrogen embrittlement of 2205 duplex stainless steel has been evaluated using electrochemical permeation measurement, hydrogen microprint technique and slow strain rate tensile test in this study.
摘要本实验主要利用电化学氢渗透量测、氢原子微印技术及慢速率拉伸试验，针对2205双相不?钢的氢脆性与氢原子扩散方式的关系进行探讨。
The rotor is then heated and pressfit onto a cooled precision-machined one-piece stainless steel shaft and the assembly is then machined and balanced as a unit.
转子经过加热后压入配合进经过冷精密加工的一体式不锈钢轴内，然后机械和平衡设备装配成一个整体。
The paper introduces single "U" groove welding procedure for stainless steel inner cylinder of multilayer high pressure vessel,opening up a new method for welding clading stainless steel vessel.
要详细介绍了内商为不锈钢的多层高压容器外U形坡口的单面工艺，从为不锈钢复合容器的开辟了一条途径。
An investigation was made on the effect of rewelding on anti-corrosion properties of ultra-low carbon austenitic stainless steel based on intergranular corrosion test and stress corrosion test.
通过对反复1~5次的超低碳奥氏体不锈钢的晶间腐蚀试验及应力腐蚀试验,研究了反复对超低碳奥氏体不锈钢的耐腐蚀性能的影响。
The effects of double coating on the pores of lime titania type stainless steel electrode are studied with high speed cinecamera, oscillograph, optical microscope, SEM with EDS, etc.
采用平板堆、高速摄影、波形分析、光学金相、扫描电镜能谱分析等测试方法，研究了双层药皮对钛钙型不锈钢条气孔的影响。
声明：以上例句、词性分类均由互联网资源自动生成，部分未经过人工审核，其表达内容亦不代表本软件的观点；若发现问题，欢迎向我们指正。
